Fingerprint Jewelry

If you’d like to make a piece of jewelry that’s truly custom, there’s nothing more personalized than a fingerprint pendant.

Tips:

1
Today I’m working with silver Sculpey brand oven-bake clay. It costs around $2 per brick. Fimo is another good brand to use, if you can find it in the color you want.

How to:

1
Break off a grape-sized amount of clay and condition it by kneading it between your fingers. The clay will feel soft and warm when it’s ready to work with.

2
Roll out the clay on a piece of waxed paper. Don’t roll it out directly on a wood surface or countertop. Don’t use any of your kitchen utensils when working with polymer clay, as oven-bake clays are not food safe. I’m using a disposable bottle to flatten the clay. I’m rolling it pretty thin, about 1/8 of an inch.

3
To create this fingerprint heart pendant, I’m having my husband’s print on the left side and mine on the right. Press firmly and hold your finger in place for a moment, allowing the clay to absorb the impression of your fingerprint.

4
When you’re ready to cut out your pendant, look around your house for interesting shapes you can use to cut your clay.  I found a heart shape on these dollar-store party favors. Check your kids’ play-dough tools. Consider using a bottle cap for a scallop shape, or the lid of a bottle for a circle.

5
Once your shape is cut, gently remove it from the wax paper and place it on a notecard or a piece of parchment paper. Use a skewer or needle to poke a hole in each piece. If you’d like, you can engrave the pendant with initials. Rubber stamps can work for this, or you simply scratch them in the clay with your skewer.

6
Place the notecard or parchment paper in a baking pan or oven-safe dish. Do not bake the clay directly on the surface of the pan– again, the clay is not food-safe, plus this can create shiny spots on your clay. Bake according to the directions on the package; the temperature can vary across brands. Don’t worry, the temperature is low enough that it won’t burn the paper.

7
Once your clay is baked and hardened, you can enhance the visibility of the fingerprints by lightly brushing them with a permanent stamping ink, such as Staz On. Read the back of the stamp pads you own, other brands are permanent when heat-set, so you can simply re-bake your clay after adding the color.

8
I find it works best to use your fingertip to rub the ink onto the pendant. Don’t forget to brush color on the sides as well.

9
Finally, add a jump ring through the hole of your pendant, and you can thread it onto a necklace. When opening the jump rings, twist sideways rather than pulling the ring apart. (Pulling will weaken the ring.)

Made By Marzipan may have received product or payment for this post. Posts may contain affiliate links. Disclosed in accordance with the Federal Trade Commission's 16 CFR, Part 255.

2 thoughts on “Fingerprint Jewelry

  1. lisa says

    i so so so appreciate the how to video’s I am disabled, and like to do projects but find it hard(due to meds) to follow written instructions sometimes, so with your videos I can make things and not become frustrated because my brain won’t do what my hands want to….thanks for doing great fun stuff…for ALL to be able to do…sincerely LisaP.

  2. Debra says

    I watch your YouTube video that you transformed your bathroom countertops I did mines and they came out gorgeous I wanted to post a picture but I don’t see how to do that thank you your video was very much appreciate it it saved me tons of money for I have 2 bathrooms thanks again

Leave a Reply to Debra Cancel reply

Your email address will not be published.