Additive Monotype

Tips:

1
Today I’ll be making an additive monotype consisting of a single painted image. I’ve printed off a clipart image of a pug dog that I’ll be working from.

2
You’ll need a smooth, clear surface to apply the paint to. This is called a plate. I’m using Grafix Impress Monoprint Plates. These are reusable sheets of plastic that are perfect for making prints.

3
You’ll need some thick paper, such as watercolor paper or cardstock. Different types of paper will produce different results.

4
You have a lot of options when it comes to paint or ink. I’m using block printing ink, made by Speedball. But you can also use acrylic paint, oil based paint, or even tempera paint. Again, you can achieve different effects with different paints.

5
You’ll need some paintbrushes.

6
You might want a spray bottle to experiment with dampening your paper with water.

7
A brayer is helpful for evenly spreading ink or pressing the paper.

8
Professional printmakers also use a press, however, I’m working without one, and you can too.

How to:
made with

Inking the Plate

1
I’m going to start by creating a colored background. I really like to use these Grafix Impress Inking Palette sheets to load my brayer. They are secured to the pad with adhesive so it won’t shift when your roll on it. Add paint to the center, then roll the brayer until the roller is evenly covered.

2
Then move to the plate and ink the plate. Try to keep the paint thin and smooth.

3
Press the paper down on the plate. Smooth firmly with your hand or roll with a clean brayer.

4
Carefully peel the paper from the plate. You’ll see that the ink has not transferred perfectly, that’s okay, monoprints look somewhat distressed and that’s part of the charm.

Creating the Image

1
Clean the plate so you can reuse it.

2
If you are working from a picture, you can tape it beneath the plate using a low-tack tape.

3
Trace the image with your paintbrush. Acrylic paint dries fast , so you’re limited to designs you can make quickly. Block printing ink has a longer working time. Do your best to keep the paint thin and even. Try to avoid adding a lot of fine detail, as your design will likely have some degree of distressing or smudging.

4
Lay the paper on top. Press with your hand or use a brayer. For best results, start at the center and work your way out.

5
Carefully lift the paper.

6
You’ll only be able to get one good print out of each painting; however, you can rinse the plate and try another. Experiment with different types of paper, and with dampening the paper. Other factors that influence your results include how much paint is on your brush, the type of paint you use, and how much pressure is applied.

Every print you make will be slightly different and each is one-of-a-kind! This is just one way to create a monoprint! In future tutorials we’ll be using the same supplies to create a variety of original artwork.

Made By Marzipan may have received product or payment for this post. Posts may contain affiliate links. Disclosed in accordance with the Federal Trade Commission's 16 CFR, Part 255.

One thought on “Additive Monotype

  1. Tina morin says

    I think your ideas are awesome, I love making crafts. Think you could email me the one on the roses out of spoons. I’m stuck in house for months now. I have no hip so I have a ton of times on myhands and I’m going stir crazy.

Leave a Reply

Your email address will not be published.